English
Français
Deutsch
Español
Italiano
Português
日本語
한국어
Русский
Side Feeding Hose Swaging/Crimping Machine for Car Aircondition Hose
Side Feeding hydraulic hose crimping machine KM-85A-32 is Suitable for u-shaped, l-shaped, and j-shaped fittings and car
Description
Basic Info
| Model NO. | KM-85A-32 |
| Name | Crimping Machine |
| Type | Computer Type |
| Weight | 930kg |
| Accessory | Dies 4 Sets |
| Color | Blue |
| Crimp Range | 4mm-35mm |
| H.S. | 846291900 |
| Application | Crimp Hydraulic Hose, Fitting & Ferrule |
| Transport Package | Wooden Case |
| Specification | CE |
| Trademark | KANGMAI |
| Origin | China Handan |
| HS Code | 846291900 |
| Production Capacity | 2000/Set |
Product Description
Side Feeding hydraulic hose crimping machine KM-85A-32 is Suitable for u-shaped, l-shaped, and j-shaped fittings and car aircondition hose.
Techincal data of KM-85A-32:
| Crimp range | 4mm-35mm |
| For hydraulic hose | 1 1/4inch |
| Side opening | 52mm |
| Opening | 15mm |
| Force | 2650KN |
| Cycle time | 5s |
| Voltage & Power | 380V-50HZ-3PH |
| Optional voltage | 220V,440V |
| Pump | Piston pump 36min/L |
| Dies sets | 4sets |
| System pressure | 20Mpa |
| Machine size | 840*820*1340mm |
| Weight without oil | 930KG |
| Shelf+quick change | Optional |
| Electric limit switch | has |
| Electric control with touch screen | Optional |
Crimped samples by side feeding hose crimping machine KM-85A-32:
Hose crimping machine why not choose kangmai ?
1. kangmai hose crimping machine CE& ISO PATENT Approved and SGS Audited.
2. The fitting and hoses crimped by kangmai machine never leakage the oil and never broken. The reason like below:
(a)The machine head process by CNC machine,roundness and taper is within 0.1mm.
(b)The machine die base and dies adopt special die steel and process by advanced craft, the hardness is above 55 HRC. The die hardness is enough so that the die life is very long and easy to crimping high pressure hydraulic hose, 4SP even 6SP.(c) The technical of machine head is forging or casting. Casting is cheap but has small hole on machine head. The piston will divide from casting machine head.
3. Strictly testing and inspetion.
(A) for raw material, we will check again by our inspector as per international standard. Only the raw material reach to international standard and allow enter kangmai facotry. (B) for hydraulic and eletrical parts, such as valve, pump, motor and so on, we use famous brand both from China and abroad.However, we will check again when these parts enter our facotry. (C) before the hose crimping machine enter our warehouse, the inspector check the machine roundess, taper, opening, speed, noise, apprance and so on. Only each parts is up to standard of ISO, CE standard, the machine can enter the warehouse. (D) when the machine package, the inspector the dies, the package and other parts of clients requriment. Everything is ok, the inspector signed and machine allow to go out the facotry.
4.KANGMAI HYDRAULIC Pay attention to package so that the machine can reach to client safely:
5. KANGMAI HYDRAULIC PAYTATION SERVICE AND TECHINCAL SUPPORT:
(A) tell you, my dear clients- the route of vessal. (B) take the photo of machine production condition and package condition to you-my clients.(C) Apply free container yard of your port, my dear client give you engouh time to clear your country customer. (D) when you get our hose crimping machine, I will tell you again how to operation the machine and how to maintaince the hose crimping machine.(E) pay a return visit after you use our machine 2-3 hours. Offer some suggestion again about maintaince machine so that you can use kangmai machine for a long time.(F) technical support: (1)24 hour technical support available(2)We can ask our engineer to your mentioned address if there is any need.
Our Contact
Send now
