Wall Roof Metal Roll Forming Machine/Rolling Machine

Basic Info

Model NO.	Rolling Machine
Product Type	Roll Forming Machine
Automatic Grade	Automatic
Power Source	Electric
Screw Design	Double-Screw
Certification	CE, ISO
Condition	New
Customized	Customized
Coil THK	0.3~0.7
Coil Width	1000
Roller Station	13
Power of Main Motor	4kw
Power of Hydraulic	3kw
Shaft Dia.	76mm
Material of Roller	#45
Material of Cutter	#45
HRC	58-60
Wall Plate THK	16mm
Transport Package	Wooden Cases
Specification	CE& ISO
Trademark	WILLING
Origin	China
HS Code	84552210
Production Capacity	20set/Mouth

Product Description

Roof &Wall Roll Forming Machine Roll forming machine can be supplied as part of Flexible Manufacturing Systems wich may consist of integrated punching, bending, notching, welding and other equipments.

Wall Roof Metal Roll Forming Machine/Rolling Machine

The roll forming line wil incorporate its mosts advanced mechanical and electronic technology. PLC controls can be managed remotedly with the PLC memory holding the operation programme sequence to run without interruption and without producing scrap between one sequence sector and another.

Wall Roof Metal Roll Forming Machine/Rolling Machine

Components for the Machine:
The roll forming machine consists of 5-ton manual uncoiler, infeed guide, fixed position driven forming stations, cutting equipment, hydraulic station, PLC control console, pre-cutter, safety cover, and manual unload product run out table.

Technical Parameters

Material	galvanized steel, pre-painted steel, and aluminum.
Thickness	From 0.3 mm to 0.7mm.
Main Motor Power	7.5 kw.
Hydraulic Power	3 kw.
Feeding Width	1000/1200mm.
Cover Width	835/1002mm and 800/1000mm.
Yield Stress	235Mpa (33KSI) ~ 350Mpa (50KSI).
Total Speed	20 m/minute for trapezoidal profile; 5m/minute for tile profile.
Cutting Tolerance	+/-2.5mm(length≤5000mm); +/-3.0mm(5000mm<length≤10000mm).
Manual Uncoiler	capacity is 5 tons.
Coil Inner Diameter	508mm or 610mm.
Voltage	380V, 3 phase, 50 HZ, or customized.
Numbers of Station	17~18 stations.
Type of Cutting	roll-formed and length-set profile cutting.

2. Material of Main Equipment:

Roller Material	High grade S45C forged steel, coated with hard chrome.
Active Shaft Material	High grade S45C carbon wrought steel, diameter 80mm.
Electric Elements	PLC control console, touch screen and transducer,from Siemens, Germany. It has data storage function. Other electrical parts, from Schneider Electric, Germany.

Cutter Blades

Cr12MoV steel with quenched treatment, hardness HRC58~61,wear-resistance, good steel structure, long life.

Process Sketch
Uncoiling the sheet -Pre-cut -Material feeding ðRoll forming - Measure the length -Cutting the panel -Panels running out to the supporter (optional: automatic stacker)

Packaging & Shipping
1.One 40ft container for loading one set machine with manual decoiler;
2.The whole Wiped Anti Rust Oil, PLC controller covered by foam film;
3.Spare parts and some small parts packed in plastic tooling box;
4.All Components Fixed by steel wire with Container.

Company Profile

Wall Roof Metal Roll Forming Machine/Rolling Machine

FAQ

Q:Are you a manufacturer?
A:Yes absolutely. Welcome a lot for your visiting to us.
Q:What's the delivery time?
A:Normaly will take 60days
Q:Do you have after-sale support?
A:Yes, we're always here for giving you advice and support for technical details since we have senior technician.
Q:Is there quality control when manufacturing the lines?
A:Yes, we have a group of team who will be responsible for quality control from laying off the raw material, processing the rollers and the other parts, make treatment on the roller surface and shaft, assembling, testing and packaging.
Q:What's your strength comparing to the other supplier?
A:We'll supplying you the best quality and service. We'll give you good advise beyond your requirements. The lines are easily for installation and with low mantenance requirements.

Products

Wall Roof Metal Roll Forming Machine/Rolling Machine

Basic Info

Product Description

FAQ